Subscribe For Free Updates!

We'll not spam mate! We promise.

Wednesday, 16 April 2014

Where Does Your Food Come From? RFID Knows.

Each year about 1 in 6 people in the United States gets sick from eating contaminated food, according to the Centers for Disease Control (CDC). Salmonella is responsible for many of the reported outbreaks and causes more hospitalizations and deaths than any other type of germ found in food. While E. Coli infections have been drastically reduced, there has been no reduction in people getting sick from Salmonella.
One way to cut down on illness caused by Salmonella is to apply lessons learned from past outbreaks as depicted below.
Farm Table
View larger version of the diagram (source: CDC)
Efforts to educate about prevention can be supplemented by enhancing the traceability of food shipments within the supply chain. The Food Safety Modernization Act calls for the FDA to focus on new food traceability rules to prevent contamination.
A report issued recenlty by ABI Research, “RFID-enabled Food Safety and Traceability Systems,”  reviews the Food Safety Modernization Act and provides forecasts for the use of RFID-enabled devices in cold chain applications. RFID allows the food industry to trace food items and record environmental conditions throughout the entire supply chain.
Sensors in RFID tags monitor the temperature and humidity of products. They can detect if the temperature for a specific food item goes above or below the ideal temperature, at any given time, and record that detail. Tags can be used on anything in the supply chain from the farms, to slaughterhouses, to pallets, to shipping containers, to grocery stores. Even the cows and pigs can be tagged.
You may remember the Orange Juice recall from this past January. CNNMoney noted that if there is wide adoption of a traceability solution in the industry, it could stop the contaminated food from being put onto store shelves in the first place, and help stop outbreaks before they start.
Aside from preventing food borne illnesses, ABI Research also points out that the information delivered by an RFID traceability solution could have a significant impact on the $35 billion a year in wasted produce. With the environment detail captured by the RFID readers during the supply chain, a grocer or manufacturer can determine precisely which containers were exposed to temperatures outside of the ideal range, and discard only those containers instead of discarding the entire shipment.
The prevention of waste or food borne illness is enough to warrant an RFID food traceability mandate in my book. Being able to impact both? I’ll let you do the math.

RFID + Cloud + BIM for Managing Personnel in Vertical Construction

ThingMagic has had the opportunity to design, build and run an RFID–based personnel management system on a large construction project in California. Only three months after going-live, the general contractor is blown away by the system benefits and the richness of the collected data.
Construction management and building owners used to have to wait for weeks and months to get data on how their projects have actually been staffed. The new RFID-based system provides this information in real-time during each workday. Construction site management used to deploy several security guards and supervisors for the sole purpose of monitoring the work force in different sections of the building. Using the new system, management can monitor the flow of people in and out of zones from the office trailer: if a person enters an unauthorized zone, an instant email alert is sent to the designated supervisor. Most importantly, should there ever be an emergency evacuation event on site, the system provides real-time updates on who is left in the building and where.
System Overview
We have deployed a three-tier system with a distinct sensor layer, database layer, and application layer.
describe the image
Figure 1: RFID-based Personnel Management in Vertical Construction: Major system components and system architecture.
Every worker on the construction site is issued a passive UHF-RFID-enabled ID card, which the individual wears on a lanyard around the neck. The sensor infrastructure consists of RFID-reader-enabled secure turnstiles for access to and egress from the job site; inside the building under construction we have installed Mercury6 RFID readers and antennas to systematically cover the entry areas of the building, staircase landings, man-lift landings, and the entrance areas of elevators banks. As a worker moves from one building section to another, the portal readers pick up the badge ID of the worker and associate the individual with the new space or zone. 
Raw sensor data is sent in real-time to a cloud-based database, where the data is translated into high-level events such as zone entries and exits, and then stored.
A multitude of web-enabled applications have access to the event data through a web API.
BIM Integration
The General Contractor and other stakeholders are given access to the data via a number of interfaces, including a mobile-device friendly web portal and email reports and notifications. However, the core filtering and reporting engine has been implemented as a plug-in to Tekla Structures, the comprehensive Building Information Modeling (BIM) and CAT software developed by our sister division Tekla.
The construction manager can visualize the personnel deployment on site within the 3D model. He or she has the ability to specify the time window of interest, the subcontractor, the zone, and other properties. The selected population of workers or a particular individual is presented along with a work zone selected in the model.
Benefits
Why would a general contractor or project owner deploy this system? Our RFID-based people management system provides:
  • Real-time visibility into worker location during an evacuation event
  • Instant alerts on security or safety breaches 
  • Instantaneous reports on sub-contractor staffing levels
  • Real-time updates on personnel-related compliance issues or ordinances.
Floor Detail
Figure 2: Full-time equivalent construction personnel over a period of about seven weeks by day, subcontractor, and zone of the building under construction.
Supported by RFID and cloud-computing, emerging life-cycle management solutions are enabling new levels of innovation, productivity, collaboration, and growth in the construction market and others.  Organizations that can best harness this “Big data” opportunity will hold a distinct competitive advantage.

Race Timing with RFID

On April 18th, 2011 over 25,000 participants are expected to run the 115th Boston Marathon – the oldest annual city marathon in the world.  In addition to its well known course meandering through eight Massachusetts cities and towns, the Boston Marathon is famous for several legendary participants.  Recognized as a Boston Marathon icon, Johnny Kelley competed in the Boston Marathon a record 61 times, winning in 1935 and 1945, placing second seven times and finishing in

How Rosie Ruiz Changed an Industry
the top five 15 times.  Kelly ran his last full marathon at Boston in 1992 at the age of 84.  Bill "Boston Billy" Rodgers won the Boston Marathon four times between 1975 and 1980, breaking the American record in 1975 and 1979.  Dick and Rick Hoyt are a father and son team who compete in the wheelchair division with Dick pushing Rick in a custom racing chair. Team Hoyt has competed in 27 Boston Marathons and often finish with times faster than 90% of the pack.
While these runners have been an inspiration to many, no one may have changed the sport like Rosie Ruiz.  In the 84th running of the Boston Marathon on April 21st 1980, Ruiz crossed the finish line before all other women runners – clocking the fastest time ever recorded for a woman in the history of the Boston Marathon and the third fastest time ever recorded for a woman in any marathon.  Following her impressive finish, investigations determined that Ruiz had skipped most of the race and rejoined runners about one mile from the finish line.  Ruiz was disqualified and as a result, the Boston Marathon and several other races instituted a number of safeguards against cheating - including RFID race timing systems that monitor when runners arrive at various checkpoints on the course.
Today, both Active and Passive RFID-based solutions are being used to time all kinds of races including marathons, triathlons, and cycling, sailing, skating and motorcycle races.  In each of these and many other races, Timing is everything.  To ensure that an accurate time is captured when every biker, runner or swimmer crosses the finish line, events like these require extremely precise timing equipment that is both durable and able to account for each participant, especially in dense, quick-paced situations.  Without RFID, races can be timed by hand with operators using a stop-watch, or by using a combination of electronic timing and video camera systems.  As with many other time-sensitive activities however, RFID has proven to be a more efficient alternative to manual tracking due to a reduction in human error and the technology’s ability to process a greater amount of data in a shorter period of time.
RFID-enabled race timing solutions are offered by companies around the globe, including several ThingMagic partners who have implemented varying combinations of UHF and other RFID technologies to meet the demands of their customers. 
RFID Timing offers timing solutions for timing running, triathlon, cycling, swimming and canoeing. Their Ultra product includes battery assisted tags that last for two and a half years, extremely thin EVA mats, and highly sensitive Gen2 RFID readers.  HDD is a lower cost package for smaller organizations or multi-sport competitions that can be set up in less than a minute, complete with easy rollout mats. RFID Timing is using ThingMagic USB readers for short range applications including encoding and checking UHF tags prior to placement onto race numbers for an event. The ThingMagic USB reader is also used to scan athletes’ tags at race pack pickup (usually the day before a race) to verify the athletes details in the timing system database are correct. 
Zoomius produces TAG Heuer Track Intelligence, a complete online motorsports management system. Hundreds of racing organizations, track days and schools are using TAG Heuer Track Intelligence to simplify their operations and provide more love to their customers.  Zoomius has also created the TITAN RFID system, powered by ThingMagic Mercury 5e readers to provide cost-effective and accurate next-generation timing and scoring systems. Perfect accuracy provided by sophisticated but easy-to-use technology, TITAN RFID, powered by ThingMagic, brings complete timing and scoring to organizations who previously couldn't afford it. 1/1000th of a second. 40 feet. 180mph. With superior ThingMagic technology Zoomius overcome hurdles that no-one else can even come close to solving.

Automating Point-of-Sale Processes with RFID

Those of us who have young children know how painful it can be waiting in line at the supermarket. Not only are we dealing with a child who has reached the end of his rope from being told “please don’t crash the cart,” “put that cereal back,” and “don’t run down the aisles,” but at the checkout line it’s a whole new level of combat. Now you have to outsmart the marketing folks who have mastered Point-of-Purchase strategy by getting you to buy candy, gum and assorted trinkets (and the National Enquirer for yourself) to keep you and the kids happy while you’re waiting in line.
MediaCartUsing shopping carts as a ‘vehicle’ for an RFID-enabled solution is not new. By leveraging ThingMagic’s embedded RFID technology Media Cart Holdings, Inc. developed a proof of concept designed to increase store sales and customer loyalty and enable marketers to obtain anonymous, point of sale consumer behavior data to improve advertising effectiveness. .
But, the shopping experience can get even better. The idea of putting grocery items in a shopping cart and walking out the door without going through a check-out line, was reported by USA Today in 2001 and it’s actually not that far-fetched.
The bar codes that already exist on each product could be replaced with printable RFID tags like those developed by researchers from the Sunchon National University, South Korea in collaboration with Rice University in Houston, Texas.  The result of their joint project is an inexpensive, printable transmitter that could be embedded in packaging. Printable RFID tags are practical because they're passive. Meaning the tags only transmit data when they’re activated by radio waves from an RFID reader. In that instant, they return the information contained in the tag.
With RFID customers fill their carts as usual, but instead of going to find an open cashier, they walk past an RFID reader on their way out the door. The reader reads all of items in the cart in seconds and transacts the purchase against a pre-selected account. There will most likely be other options available too, like signing for your purchases at a kiosk once your total is displayed. Combining this point-of-sale data with data gathered from RFID readers at product shelf locations, retailers could also record the changes to the store's inventory and automatically submit replenishment orders to their suppliers.
Researchers admit there are some hurdles to widespread, retail adoption. The printable tags must be no larger than the size of current bar codes and the read range must increase. With the progress made to date in the read range of passive UHF RFIDS tags, as noted in our blog that introduced this campaign, this idea maybe a reality very soon.
What then? What happens to Point-of-Purchase displays? Where will the tabloid magazines go? Let us know your thoughts of what the supermarket of the future might look like by leaving a comment here.

What Is Access Control

Multi-door and multi-site installations for large offices, industrial units, warehouses, hospitals and universities use a front-end computer which connects to a network of door controllers and enables access to be controlled by card readers.

There are a huge range of Access Control options available and although most are used for security reasons some are used for timekeeping or to manage the flow of people into or around buildings.
Access Control Provides Flexible Control To Buildings, Security and More
Access control technology provides flexible control over access to your building and benefits organisations of all sizes as a low cost, easily maintained solution to managing exit and entry at one or more entrances. However, it is more than just a means to improve security at entrances and exits.
Most organisations, not just those with security concerns, require only authorised persons to be granted access to their premises. Access control systems provide greater control over buildings and protect assets from theft, nuisance and vandalism but that is only part of the story.
Although these systems are most commonly seen controlling the access of individuals into areas in a building the electronic solutions enable organisations to monitor the location of people within a building and to manage user permissions and so look after the flow of people around a building.
Different Access Control Systems from Single Door to Multi Site
Basic systems typically protect a single door usually with audio entry or keypad/PIN devices, although video entry systems are also used fairly frequently. These are commonly used by smaller businesses and premises.
Larger premises more typically need one or two doors monitored and so use card readers controlled by local door controllers to achieve control over authorisation. These systems are more commonly favoured by schools, retail units and small offices.
Access control has embraced biometric technology, with fingerprints, which are unique and difficult to duplicate being used for even tighter security and in some instances they use an iris scanner instead of fingerprints. Smart card technology is also popular especially on door entry systems and logging systems. It can be used more flexibly than some other access control systems; it is not limited to just controlling access through doors and into buildings. Smart-card technology enables secure logins onto computers and to purchase goods, without the need for money.
Access control is used by some organizations to monitor time keeping and can be integrated with payroll systems or used to monitor the reliability of suppliers. However, more commonly the technology is integrated with CCTV and used for security purposes than for monitoring staff and suppliers.

Tuesday, 15 April 2014

Warehouse Accounting - How To Improve and Automate Your Warehouse Accounting Methods

     
Warehouse accounting can be almost completely automated with the right software. The right software will offer the ability of accounting for the availability and changes in material and supplies involved in the inventory which are stocked in your warehouse. Also, it will offer options for you to account for the fixed asset objects and the workflow documentation involved in the warehouse system.
If your looking to improve your warehouse accounting to have more accurate data to make better decisions with, then you will want to read this article. In it, I'll give you various subjects to consider to improve your warehouse accounting immediately. Take this advice and apply it to your situation to get the most out of it.
In addition, it will create a system for you to use for the counting of receipts in issue of different various inventory items. It will give you the stock status in full report of any material or supply inventory that you keep on hand, so you can control your stock of inventory and know when you need to order more goods.
And finally, with the right warehouse accounting software, it will give you full accessibility to access the proper documentation and information you need, so you can distribute it amongst the right employees, and also study it to look for areas of improvement.
Besides offering accurate and real-time data to account for all the supplies in your warehouse, there's certain warehouse accounting software which also allows you to give information to the accountant and better enable accurate accounting procedures.
You can prepare, process, and transfer all your warehouse documentation and data to an accountant for additional accounting assignment, and rating the different operations of inventory flow in the warehouse.
By having accurate warehouse accounting information at your disposal, you should enjoy increased warehouse productivity, and better operational performances. With this information, you can start working on process optimizations. By tracking the data, you can flag the efficiencies that have occurred in your distribution system, and make a deliberate attempt to fix those inefficiencies to improve performance.
Also, the information you gain from your warehouse accounting can be used to train your employees. By being able to track the performance and analyze the current working procedures, you can look for ways to improve your work efforts to get more production out of them and enjoy a higher profit margin for productivity.
In conclusion, I have given you different information on warehouse accounting software, and how you can use it to help improve the efficiency of your distribution channel and of your business as a whole.

Cloud Computing and How to Guarantee Economic Value From Your SaaS Marketing Automation Investment

Some marketers are choosing to optimize their operations through marketing automation using cloud computing or Software-as-a-Service (SaaS) solutions to reduce marketing operation expense while securing productivity gains fast. According to Knowledge-At-Wharton:
Marketing in a recession is hard enough to do if demand for your products is on a decline. But when your budget gets the squeeze, it's time to start doing some things differently if you're to survive.
How about some pennies from heaven from cloud computing?
These days, no computer user is an island. A recent study determined that 80 per cent of the data used by business comes from outside the company. Cloud computing 'is the technical response to this reality', said Anthony Arott of anti-virus software company Trend Micro, based in California.A somewhat broader definition of cloud computing comes from Barry X. Lynn, CEO of 'cloud platform' provider 3tera of Aliso Viejo, California. 'A lot of people define the cloud as having the computers be someplace else. And that's not true,' he said. 'People have run IT in data centres they didn't own for years. In the 1970s, we called that 'remote job entry'. In the 1990s, it was 'outsourced data centres'. It's not a new concept.'
Mr. Lynn is correct. Today the new names may be SaaS and cloud computing, and though they may sound new, functionally these services have been with us for a long time in various forms. More importantly, the key value of SaaS and computers in the cloud today lies in their enabling you to optimize your operation fast and cheaply -- without you having to build the core infrastructure from scratch. This way you can exploit the (little) market opportunity that there is in the economy at this time, particularly if you're a small business.
What this means is that SaaS offerings have better take less than 3 months to implement so that by month 6 from project initiation you're able to benefit from efficiencies and greater productivity from an optimized operation. How do you make sure to accomplish this?
You begin by thinking about your SaaS provider from the back-end perspective first and not from the colorful screen shots and pretty looking demos that sales reps present to you.
  1. Start by considering a SaaS of choice as having to transact with other technology platforms in your operations environment, whether they sit on or off premises, because no SaaS operation is an island. To carry out these transactions, one system must build a bridge to another. These bridges that your SaaS provider must build to another SaaS or internal system have better be straight-forward to set up and test, while remaining flexible enough to grow with both your operation and the infrastructure that they're connecting to.
  2. Your SaaS should also be able to convert its system's data into whatever format may be necessary to enable other applications that will dependent on it to operate, including keeping its own data clean or cleaning it on its way to another system.
  3. Your SaaS should have sufficient flexibility to modify its operation model enough to let you become competitive through some process adjustments were your own competitors using the same SaaS solution themselves.
  4. Your SaaS should be able to depend upon a top team of consultants with expert knowledge about their technology service and a tried methodology to get you up and running on it in no time. Don't rely on the SaaS Tech Support team alone. They log your trouble tickets. But it's the engineer in the back who comes up with a fix to your problem. Get to the engineers first hand and work out all the kinks in your operations process upfront or you will find yourself sharing a sob story with tech support only too soon afterwards.
You're taking all kinds of risk if you don't work out your SaaS arrangement this way. And with all that cloud computing risk unmitigated, chances are you might not secure economic value quickly from your SaaS investment. Fire and brimstone will rain upon you then! So follow the 4 steps above to mitigate the less obvious risk.
Arturo F Munoz is an expert business process designer specializing in demand generation, marketing database and CRM operations workflows that consolidate disparate data sources into meaningful and actionable knowledge for the complex marketing and sales organization.

Article Source: http://EzineArticles.com/3977960